BS Bushing
British Transformer Bushing
The BS range of bushings are manufactured to meet specific requirements in the UK and are typically approved by the NGC or DNO's. The detail of the bushing is governed by historical standard such as EATS 35-1 or BEBS T2, so that we can offer replacement or refurbishment for existing units. Air end termination is typically either the screwed conductor stem or flag terminal (various hole arrangements are available) and the oil end termination can be as the air end termination or a machined hole arrangement to suit the customers requirements.
Sus ventajas de un vistazo
-
For specific requirements in the UK
-
Manufactured and tested in accordance with IEC 60137
-
Voltage from 1.1 kV to 52 kV
-
Current up to 9100 A
Información sobre el producto
| Rated voltage | From 1.1 kV up to 52 kV |
| Maximum rated current | From 250 A up to 7500 A |
| Nominal creepage distance | From 89mm to 1650mm |
| Antipollution level | From P1 up to P4 |
| Standard reference | IEC 60137 (formerly EATS 35-1, BEBS T2) |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, Multiple connection styles |
Technical data
| Rated voltage | From 1.1 kV up to 52 kV |
| Maximum rated current | From 250 A up to 7500 A |
| Nominal creepage distance | From 89mm to 1650mm |
| Antipollution level | From P1 up to P4 |
| Standard reference | IEC 60137 (formerly EATS 35-1, BEBS T2) |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, Multiple connection styles |
