Schlegel and his team took on the challenge and got started on the development of a suitable filter concept. The aim was to drop the harmonic level in the frequency range of up to 9 kHz over a broad spectrum, significantly reducing individual harmonic frequencies in the process. The experts started by taking comprehensive measurements at the wind farm before combining them with a mathematical simulation. “We can only come to a optimal solution if we link our models to real measured values,” states Schlegel. A passive harmonic filter system is always made up of the same components. These include reactors, capacitors, circuit breakers, and voltage transformers.
“The key was to match these components with each other so that they would actually filter out the harmonics to a sufficient degree in the high-frequency range. In the end, every filter circuit system is different, as it is always precisely tailored to the conditions on site. The grid structure plays a role here – but so too do many other parameters.” The solution turned out to be a concept involving three filter circuits with tuning frequencies of 189/3,800/5,600 Hz and a total output of 2,800 kvar. The Power Quality experts also completed the installation on site. “We aim to provide our customers with integrated solution concepts. That is why we oversaw the project from the initial concept all the way through to commissioning,” says Schlegel. Conformity tests confirmed the performance of the system in operation. As a result, 13,800 households have been receiving clean electricity from clean wind power since April 2017.