CEDASPE® CBB-OO
Bushings used within a disconnecting chamber (before the cable termination box) or within a cable box
The Oil / Oil range of cable box bushings are designed in accordance with EN 50336 and also comply with IEC 60137. A range of bushings are available up to 36 kV- 4000 A. If higher voltages or currents are required resin impregnated condenser bushings can be offered to meet other exact requirements. This range of bushings is typically used within a disconnecting chamber (before the cable termination box) or within a cable box but typically in an oil / shrouded arrangement. The cable box shrouding would typically be a cold fit boot or heat-shrink termination.
Sus ventajas de un vistazo
-
Specifically designed for use within indoor applications
-
Typically oil / shrouded arrangement
-
Voltage up to 36 kV
-
Current up to 4000 A
-
According to EN 50336, IEC 60137 (historical BS 2562/ BS 6435)
Información sobre el producto
| Rated voltage | 12 kV - 36 kV |
| Maximum rated current | 250 A - 4000 A |
| Nominal creepage distance | 102 mm - 178 mm |
| Standard reference | EN 50336, IEC 60137 (formerly BS2562/BS6435) |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, multiple connection styles |
Seleccionar idioma
| Rated voltage | 12 kV - 36 kV |
| Maximum rated current | 250 A - 4000 A |
| Nominal creepage distance | 102 mm - 178 mm |
| Standard reference | EN 50336, IEC 60137 (formerly BS2562/BS6435) |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, multiple connection styles |
Seleccionar idioma
