Operations for offshore applications: Reinhausen

动力在线产品组合招聘公司介绍

Operations for offshore applications

Optimize offshore operations with our reliable equipment and systems. From automated controls to efficient power management solutions, we help you maximize productivity at sea.

Back: Offshore-Wind

Operations for offshore applications

Optimize offshore operations with our reliable equipment and systems. From automated controls to efficient power management solutions, we help you maximize productivity at sea.

Back: Offshore-Wind

Tap-changers

VACUTAP® VRL®

The transformation of energy systems places enormous demands on system-critical network components such as power transformers. Our answer to this is VACUTAP® VRL® I 3201. The world's most powerful vacuum tap-changer is based on the further development of our proven VACUTAP®-technology. It is the...

VACUTAP® VM®

Universal on-load tap-changer in vacuum design for transformers of the medium power range. VACUTAP® VM® is the product for all familiar applications in transmission grids and special requirements in the industry.

VACUTAP® VR®

Universal on-load tap-changer in vacuum technology for transformers with special power requirements. VACUTAP® VR® is the most powerful on-load tap-changer in vacuum technology. It is at home wherever performance and safety are needed in grid or industrial operations.

VACUTAP® VV®

Compact on-load tap-changer in vacuum technology for transformers of the medium power range. VACUTAP® VV® is the professional for network applications, but can also be used in nearly all other applications.

DEETAP® DU

DEETAP® DU is a rotating de-energized tap-changer for adjusting the voltage of oil-insulated transformers up to maximum power ranges. Unlike on-load tap-changers, with de-energized tap-changers, the desired winding tap is adjusted with the transformer turned off.

DEETAP® SPT

DEETAP® SPT is a product family of compact linear de-energized tap-changer for small power transformers, perfectly suited for installation on the winding side. A modular drive concept with manual and motor-drive units offers maximum flexibility in the integration of the de-energized tap-changer into...

CAPT® 010

The CAPT® 010 tap changers have a direct drive equipment at one side of the tap changer. The change of position is allowed by an angular movement for certain degrees. Handle or wheel is always made of stainless steel and can be further equipped with a mechanical block. The shaft (standard length 270...

CAPT® 020

The CAPT® 020 series with up to 11 positions for standard applications can be rotated by the drive shaft that can be placed at one side or between the phases. The drive equipment can be integrated with mechanical block, electrical block and/or microswitches for remote control. Motor Drive Unit (MDU)...

CAPT® 040

The tap changers from CAPT® 040 series are specifically designed to withstand a high rating of current and voltage up to 1.500 A. Multiple configurations are available: the tap changer can be installed vertically or horizontally, thanks to an efficient system of bevel gears. The change of position...

Dehydrating breathers

MESSKO® MTRAB® 2.5

Ever longer operating times and ever higher current densities lead to constantly increasing demands on operating equipment. The maintenance-free MESSKO® MTRAB® 2.5 dehydrating breathers continuously dehumidify and monitor the breathing cycle of power transformers – in all climatic zones. They...

ECOTRAC® SMART BREATHER

Ever longer operating times and ever higher current densities lead to constantly increasing demands on operating equipment. The maintenance-free ECOTRAC® SMART BREATHER continuously dehydrates and monitors on-load tap-changers, arc suppression coils and transformers, thus ensuring increased...

conventional breather cedaspe ve

CEDASPE® VE

CEDASPE® VE conventional breathers are used for dehydrating the air before it enters the transformer. They consist of a transparent hollow cylinder tube which contain chemically pure silicium salt (silica gel) with a colored indicator. The silica gel, which absorbs the humidity, indicates the...

conventional breather cedaspe vc

CEDASPE® VC

CEDASPE® VC conventional breathers are used for dehydrating the air before it enters the transformer. They consist of a transparent hollow cylinder tube which contain chemically pure silicium salt (silica gel) with a colored indicator. The silica gel, which absorbs the humidity, indicates the...

MESSKO® -Series

MESSKO® COMPACT

MESSKO® COMPACT series devices prove their quality under extreme climatic conditions. The closed system allows measured values to be read off clearly even after decades – without readjustment or recalibration. The pointer thermometers with adjustable micro-switches reliably measure the oil and...

thermometer trasy oiltemperature

MESSKO® TRASY2

The modular MESSKO® TRASY2 temperature measuring system is suited for measuring oil and winding temperatures (thermal image) in medium or large distribution and power transformers, reactors or similar applications. The pointer thermometers are systems that function without power with freely...

MESSKO® MTO

MESSKO® MTO oil level indicators are measuring devices with or without main switching contacts. They are especially well suited for fill level measurements in transformer oil conservators. There are two different float drive types with regard to the oil conservator: float movement in radial or axial...

MESSKO® MMK

The MESSKO® MMK magnetic oil level indicator shows the fill level, without needing a float located in the container. The magnetic level gauge can be easily attached to existing flange connections (retrofit) in accordance with DIN 42552. A measuring tube is flanged to the container as a replicate...

MESSKO® BETECH®

MESSKO® BETECH® thermometers measure the oil and winding temperature (thermal image) in power transformers. The thermometers consist of a temperature sensor which is connected to the bellows for the measurement display via a capillary tube, and another expansion bellows for the compensation of the...

Other suitable products

ETOS®

The standalone version of ETOS® lets you evaluate and record all relevant operating data of your power transformer, such as monitoring the tap-changer or evaluating transformer utilization. ETOS® helps with focused planning of operation and maintenance. Our open ETOS® system can connect sensors from...

TAPCON® 230

The new generation TAPCON® 230 with a new design and significantly improved hardware and software functions. The concept of the new TAPCON® 230 is designed for consistent ease of use - everywhere and in all phases of operation. Together with users, we developed an intuitive operation that requires...

TAPCON® 250

The standard voltage regulator for the North American market. Regardless of whether simple control tasks or complex requirements - the TAPCON® 250 can be used flexibly and reliably fulfills all tasks. A true all-rounder that also offers maximum ease of operation and simplifies retrofits. In...

TAPCON® ISM®

Our more than 50 years of experience are concentrated in the latest TAPCON® generation. The result: probably the best voltage regulator we have ever had to offer. With maximum flexibility for current and future requirements, the new TAPCON® sets standards. Equipped with the latest features of...

CEDASPE® TBX

CEDASPE® TBX is designed to offer an easy, fast and reliable solution for connecting CT wires inside the transformer to external measuring/monitoring systems. It has a compact flanged aluminum body for easy attachment to transformer walls with welded studs or screws. This solution surpasses the...

scrollToTop