MESSKO® MFLOC 2.0

New Generation of Flow Indicators

MESSKO® MFLOC 2.0 immediately and reliably detects a pump failure in the coolant circuit of a power transformer. There are various versions for oil, water or alternative media. A specially designed paddle is available as flow resistance in the coolant circuit, thus monitoring the flow of coolant. If the pump is active, the paddle is reliably pressed to the end stop for laminar as well as non-laminar flows starting from 0.7 m/s and the integrated micro-switch is triggered. This newest generation was thoroughly redeveloped and optimized.

Your Advantages at a Glance

  1. State-of-the-art paddle design and material – manufactured from glass fiber-reinforced plastic

  2. Reworked internal architecture (switch position / new switch cam)

  3. Optimized venting

  4. Coating in accordance with the current version of DIN EN ISO 12944-9, available in C4H, C5H and CX

  5. Micro-switches with high switching capacity (10 A/250 V AC; 4 A/24 V DC)

Show all

Product Information

Housing / terminal box Aluminum alloy, RAL 7033 or 7038, powder-coated in accordance with DIN EN ISO 12944 part 9, class C4H, C5H or CX
Mounting flange Aluminum alloy
Paddle Glass fiber-reinforced plastic / polyamide copolymer, 50% glass fiber
Indicator dial Aluminum, matted, anodized
Viewing glass Laminated safety glass with UV filter
Setup Indoors and outdoors, tropic-proof
Ambient temperature -40 °C - 80 °C
Temperature of cooling medium -30 °C - 120 °C
Degree of protection IP54 in accordance with DIN EN 60 529 / IP66 applies only to all non-connector variants (terminal box with connection terminals). For all connector variants (ANSI connector and military connector) IP54 remains applicable
Rated insulation voltage 2.5 kVAC / 1 min
Weight including terminal box 2 kg
Weight without terminal box 1.5 kg
Nominal diameter of the pipe, flange version DN100 to DN300
Pressure-tightness Tested up to 3 bar oil pressure, 75 °C

Select language

Please make a selection to display suitable downloads
Housing / terminal box Aluminum alloy, RAL 7033 or 7038, powder-coated in accordance with DIN EN ISO 12944 part 9, class C4H, C5H or CX
Mounting flange Aluminum alloy
Paddle Glass fiber-reinforced plastic / polyamide copolymer, 50% glass fiber
Indicator dial Aluminum, matted, anodized
Viewing glass Laminated safety glass with UV filter
Setup Indoors and outdoors, tropic-proof
Ambient temperature -40 °C - 80 °C
Temperature of cooling medium -30 °C - 120 °C
Degree of protection IP54 in accordance with DIN EN 60 529 / IP66 applies only to all non-connector variants (terminal box with connection terminals). For all connector variants (ANSI connector and military connector) IP54 remains applicable
Rated insulation voltage 2.5 kVAC / 1 min
Weight including terminal box 2 kg
Weight without terminal box 1.5 kg
Nominal diameter of the pipe, flange version DN100 to DN300
Pressure-tightness Tested up to 3 bar oil pressure, 75 °C

Select language

Please make a selection to display suitable downloads

Contact our Experts

Patrick Wright

Area Sales Manager Illinois, Iowa, Kansas, Michigan, Minnesota, Nebraska, North Dakota, South Dakota, Wisconsin

Phone +1 513 940 2386
E-Mail p.Wright@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

United States of America


In order to offer you the best possible service, we would like to refer you directly to the right contact person. Please click on the following link.

US contacts

United States of America

QR

Scan the QR code to save the contact details as a VCF on your smartphone

To the Contact Finder

contact
Contact