CAPT® 010
Easy design and direct drive – basic, but always reliable
The CAPT® 010 tap changers have a direct drive equipment at one side of the tap changer. The change of position is allowed by an angular movement for certain degrees. Handle or wheel is always made of stainless steel and can be further equipped with a mechanical block. The shaft (standard length 270 mm) can be adapted to customer’s needs according to specific requirements. Contacts are available in different versions: threaded, tubular or flag-shaped. For rated currents at 600 A, contacts are always silver-plated as a standard solution to ensure better conductivity and resistance.
Your Advantages at a Glance
-
Compact size, high performance
-
Direct handle, shaft at side
-
Stuffing box to be welded separately to the transformer tank
-
Customizable shaft length
Product Information
| Highest voltage for equipment Um | 24 kV, 36 kV, 52 kV, 72.5 kV |
| Max. rated through-current | 120 A - 600 A |
| Number of positions | 2 - 9 |
| Connection(s) | bridging, linear, star-point, series-parallel, star-delta |
Select language
| Highest voltage for equipment Um | 24 kV, 36 kV, 52 kV, 72.5 kV |
| Max. rated through-current | 120 A - 600 A |
| Number of positions | 2 - 9 |
| Connection(s) | bridging, linear, star-point, series-parallel, star-delta |
Select language
