MESSKO® MTRAB® 2.5
Ever longer operating times and ever higher current densities lead to constantly increasing demands on operating equipment. The maintenance-free…
Reduces operating costs and increases operational reliability
Actively protects the insulation medium against humidity
Condition-dependent and self-learning algorithm
ECOTRAC® SMART BREATHER
Ever longer operating times and ever higher current densities lead to constantly increasing demands on operating equipment.
The maintenance-free…
Reduces operating costs and increases operational reliability
Actively protects the insulation medium against humidity
Condition-dependent and self-learning algorithm
MESSKO® COMPACT
MESSKO® COMPACT series devices prove their quality under extreme climatic conditions. The closed system allows measured values to be read off clearly…
Optional outputs: RS485 Modbus RTU or 4...20 mA analog output
Extremely durable and reliable without readjustment or recalibration
Safe function even in case of vibrations and extreme outdoor conditions
MESSKO® TRASY2
The modular MESSKO® TRASY2 temperature measuring system is suited for measuring oil and winding temperatures (thermal image) in medium or large…
Bourdon tube measuring system without additional mechanical parts
Extremely durable and reliable without readjustment or recalibration
Safe function even in case of vibrations and extreme outdoor conditions
DEETAP® DU
DEETAP® DU is a rotating de-energized tap-changer for adjusting the voltage of oil-insulated transformers up to maximum power ranges. Unlike on-load…
Due to its modularity, DEETAP® DU is the ideal de-energized tap-changer for all applications, including as a cost-effective alternative to on-load tap-changers and heavy-duty applications such as those in phase shifter transformers
Testing beyond standards
for all products in MR's one-of-a-kind tap-changer test laboratory
Consulting and engineering – Excellent consultation for the selection and design of on-load tap-changers
MESSKO® BETECH®
MESSKO® BETECH® thermometers measure the oil and winding temperature (thermal image) in power transformers. The new Modbus-compatible generation is…
Robust expansion bellows technology
Reliable even with high switching loads
No readjustment or recalibration over the entire service life
CEDASPE® VT
The MR CEDASPE® VT Bourdon thermometers are designed for oil temperature measurement in DT transformers. They are available either as 80 mm indicators…
Bourdon-tube measuring system with no additional mechanical parts
Housing, connection, stem and capillary made of stainless steel
Extremely durable and reliable
COMTAP® ARS
COMTAP® ARS is an advanced retard switch with two operating positions that is specifically used to reverse the polarity of windings in applications…
Economic solution for applications with large regulating ranges
Testing beyond standards
for all products in MR's one-of-a-kind tap-changer test laboratory
Consulting and engineering – Excellent consultation for the selection and design of on-load tap-changers
CEDASPE® SBC
The SBC series are maintenance-free, hollow-core, liquid-filled bushings based on EN 50180, and are tested in accordance with IEC 60137. The…
Maintenance-free guarantee
Fully interchangeable with DIN/EN standard bushings and suitable for retrofit
Partial discharges free
CEDASPE® VE
CEDASPE® VE conventional breathers are used for dehydrating the air before it enters the transformer. They consist of a transparent hollow cylinder…
Single body design with hydraulic inlet valve
1-to-1 exchange of DIN series breathers
Multiple options in different sizes
CEDASPE® BM
CEDASPE® BM series is a bimetallic Oil Temperature Indicator without contacts mainly used for application in distribution transformer field. CEDASPE®…
BM80 (dial 75 mm) / BM100 (dial 95 mm)
Bulb style F, M and PK
Execution NT (radial rigid stem) and BE (back entry rigid stem)
DEETAP® SPT
DEETAP® SPT is a product family of compact linear de-energized tap-changer for small power transformers, perfectly suited for installation on the…
Intelligent designs support compact power transformer dimensions and reduce the required installation space
Testing beyond standards
for all products in MR's one-of-a-kind tap-changer test laboratory
Consulting and engineering – Excellent consultation for the selection and design of on-load tap-changers
CEDASPE® VC
CEDASPE® VC conventional breathers are used for dehydrating the air before it enters the transformer. They consist of a transparent hollow cylinder…
Single body design with mechanical inlet valve
Interchangeable with DIN series breathers
Multiple options in different sizes
MESSKO® MTO
MESSKO® MTO oil level indicators are measuring devices with or without main switching contacts. They are especially well suited for fill level…
Optional outputs: RS485 Modbus RTU or 4...20 mA
Optional installation with angle of inclination (15°; 30°; 45°)
Laminated composite safety glass with UV filter
MESSKO® OLS
Do you see potential for improvement in your existing oil level switches? Then MESSKO® OLS is your solution. The advanced oil level switch with…
No readjustment or recalibration during the entire service life
With durable coating to withstand offshore environments
Functionally reliable and highly accurate thanks to state-of-the-art measuring technology
CEDASPE® IFG
The CEDASPE® IFG is a magnetic oil-level indicator used for checking and measuring the oil level inside the conservator. It outputs an analog…
Easy to read (inclined mounting)
Up to 4 changeover switches
Interchangeable with equivalent models of other brands (Japanese design)
CEDASPE® NFG
The CEDASPE® NFG is a magnetic oil-level indicator used for checking and measuring the oil level inside the conservator. The outcome is an analogic…
Up to 4 changeover switches
Interchangeable with equivalent models of other brands (Italian design)
Waterproof - IP 65 protection degree
TAPMOTION® DD
If you are looking for uncompromising quality and reliability in a manual drive unit, the TAPMOTION® DD is your choice. It offers you decades of…
CEDASPE® IMLO R100
The CEDASPE® IMLO series, for oil immersed power transformers, give an analogic indication of the oil level inside the conservator; when required, the…
Up to 4 changeover switches
Interchangeable with equivalent models of other brands (Italian Design)
Waterproof - IP65 protection degree
CEDASPE® ILRM
The CEDASPE® ILRM series vertical float oil level gauge is intended for hermetically sealed distribution transformers without a conservator: it…
Connection threaded 1M
Hole on the cover tank: 45 mm
Top transparent screen with min and pointers
CEDASPE® PRIS OLG
The CEDASPE® PRIS OLG is a oil level gauge that gives an optic indication of the oil level inside a transformer tank or inside a conservator. The…
Three dimensions available: SMALL, MEDIUM, LARGE
Window material: tempered glass
Standard finish: stainless steel
CEDASPE® IML
The CEDASPE® IML series magnetic oil level gauge is used for checking and measuring the oil level in oil-immersed distribution transformers with a…
Dial diameters: 65/80/100 mm
3/4 holes round flange execution
Waterproof - IP 65 protection degree
MESSKO® MMK
The MESSKO® MMK magnetic oil level indicator shows the fill level, without needing a float located in the container. The magnetic level gauge can be…
Independent functioning without external power
Permanently weatherproof indicator rail
CAPT® 090
Only 5 components to be assembled by the customer and multiple connections available: CAPT® 090 is a really smart and flexible solution for…
Compact size, high performance
Easy installation, low weight
Only 5 components to be assembled by the customer
CAPT® 010
The CAPT® 010 tap changers have a direct drive equipment at one side of the tap changer. The change of position is allowed by an angular movement for…
Compact size, high performance
Direct handle, shaft at side
Stuffing box to be welded separately to the transformer tank
CAPT® 020
The CAPT® 020 series with up to 11 positions for standard applications can be rotated by the drive shaft that can be placed at one side or between the…
Direct and remote control available
Customizable shaft length
Microswitches for positioning monitoring available
MESSKO® MFLOC 2.0
MESSKO® MFLOC 2.0 immediately and reliably detects a pump failure in the coolant circuit of a power transformer. There are various versions for oil,…
State-of-the-art paddle design and material – manufactured from glass fiber-reinforced plastic
Reworked internal architecture (switch position / new switch cam)
Optimized venting
CEDASPE® CCL2
CEDASPE® CCL2 detects the operation of circulation pumps in cooling installations, especially of electric transformers, for detecting the flow of oil…
Variants for oil or water available
Compact design
Pipe diameter: DN 50 up to DN 300
CEDASPE® SCFR2
CEDASPE® SCFR2 checks the circulation of dielectric fluids in the cooling installations of electric transformers according to French standard NF C…
Two-parts construction with detachable back flange
Pipe diameter: DN 80 up to DN 400
Flow: from 0,5 m/s up to 3 m/s
CEDASPE® HC [from 5000A]
CEDASPE® HC are liquid filled (hollow core/solid porcelain open type) bushings in accordance with EN 50180 and EN 50243 Standard. CEDASPE® HC feature…
Easy handling thanks to the top-lifting M12 lug
Very high level of customization (i.e.: rod extension, special connectors, special finish surface, etc.)
Suitable for extreme applications (i.e. very polluted areas, very cold/hot ambient temperatures, very corrosive/aggressive environments, etc.)
CEDASPE® TBX
CEDASPE® TBX is designed to offer an easy, fast and reliable solution for connecting CT wires inside the transformer to external measuring/monitoring…
Equipped with an external identification plate and internal numbered plate for terminals
Compact design and easy attachment (plug-and-play product)
Wide variety of sizes and number of terminals/sizes
Protective Relay RS2001
The protective relay RS2001 is designed to protect on-load tap-changer and the transformer during a malfunction within the on-load tap-changer or the…
RS2001 specially designed for MR tap changer
Protection degree IP 66
Inspection Window
CEDASPE® CGX
CEDASPE® CGX is designed to offer an easy, fast and reliable solution for core and frame grounding. It has a compact flanged aluminum body, allowing…
Equipped with an external identification plate and internal numbered plate for terminals
Compact design and easy attachment (plug-and-play product)
Anti-rotation and non-loosing terminals
ETOS®
The standalone version of ETOS® lets you evaluate and record all relevant operating data of your power transformer, such as monitoring the tap-changer…
Modular scope of function, ability to expand to individual needs
Smart monitoring and control as the basis for networked transformers
ETOS® replaces several control cabinets
MESSKO® MPREC®
The MESSKO® MPREC® pressure relief device protects distribution and power transformers, electric coils and tap changers reliably and safely in the…
Hood with interior micro-switches
Opens within 2 ms; closes within 70 ms
Suitable for wind turbines
CEDASPE® DN (JUZ, RUZ, SUZ)
CEDASPE® DN valve is used to allow Buchholz relay replacement without needing to drain the insulating liquid from the conservator. It features…
Excellent surface finishing (coated and uncoated surface finishing)
Suitable for isolation for Buchholz relay and cooling systems
Offshore version available
CEDASPE® TW & SW (WUZ, WUTZ, WUPZ)
CEDASPE® TW and SW valves made of forged, galvanized mild steel with epoxy finishing are suitable for indoor and outdoor use. The shaft is made of…
Excellent surface finishing
Suitable for easy and safe transformer radiator isolation
Offshore version available
ETOS® ED
In addition to driving the tap-changer, ETOS® ED lets you evaluate and record all of the relevant operating data from your power transformer, such as…
Proven drive function for tap changers
Reliable monitoring of transformers
Cost-saving operation, cost-efficient implementation
MESSKO® ZT-F2
ZT-F2 is a temperature transmitter for TRASY2 which is required for measuring winding temperature with TRASY2. It offers quick and easy configuration…
Digital-ready: Integrated MODBUS RTU / RS485 interface
Redundant: Maximum availability through flexible signal transmission
User-friendly: Intuitive gradient adjustment via DIP switches (winding temperature)
CEDASPE® VP (former ETI VS)
The Pressure relief valve is designed to limit the pressure rise inside a tank, in order to prevent an excessive mechanical stress of the walls. It…
It works automatically based on valve setting
Electrical switches: from 1 up to 3 (2 contacts each)
It features compression spring(s) outside
CEDASPE® 1kV series 2021 EN [former ED series]
The new generation of ED bushings: The CEDASPE® 1kV bushing series according to EN50386 with a rated current from 250A to 4500A, fully interchangeable…
Optimal tightening solution thanks to the reinforced nylon insulating support on the oil side
Compact body
Smart assembling, packing and delivery
MESSKO® Multi-Ballast
The universal ballast transforms the CT currents of 1 A, 1.5 A, 3 A, 4 A and 5 A to the current required for the thermal image. The ballast is suited…
Universal device for the TRASY2 and COMPACT series
Transforms 1 A, 1.5 A, 3 A, 4 A and 5 A
Different designs available for delivery
MESSKO® PQ96/PQ144
The PQ electric coil indicator is a display instrument for installation in control panels. The PQ96/144 coil indicator is available in 96 mm and 144…
Coil indicator for control panel installation
MESSKO® D1272AT
D1272AT digital indicators are used for the remote display of the oil or winding temperature and the oil level. They are installed into control…
Digital indicator for control panel installation
Freely adjustable limit contacts
Various output signals
MESSKO® EI 100/160
The MESSKO® EI 100/160 electronic display enables the remote display of a temperature or percentage value of any sensor. This is displayed using an…
Remote display
Attachment in the control cabinet or to the transformer
Ideal addition for devices with analog output (4 - 20 mA)
MESSKO® Thermo well and kick protection
Standard thermo well for installation of the oil thermometer into the thermometer pocket in accordance with DIN 42554. Kick protection against…
MESSKO® Combi Well
The combi well, like the thermo well, is an assembly sleeve for the oil thermometer. It can be installed in the thermometer pocket in accordance with…
MESSKO® Pt-MU
Using the Pt-MU measuring transducer, the signal of a Pt100 is converted into a standard signal proportional to the temperature. For example, the…
Measuring transducer for Pt100
ETOS® TD
In the ETOS® TD drive for tap changers, the energy is made available precisely where it is needed – i.e. at the tap-changer cover. The drive commands…
Innovative drive for tap changers
Benefits during the manufacture and operation of power transformers
Smart monitoring and control as the basis for smart transformers
MESSKO® IgT-MU
The IgT-MU measuring transducer is used to transform and galvanically isolate direct current or direct voltage into an impressed direct current and…
Direct current measuring transducer
CEDASPE® VP150-QT/VP150-ST (former ETI VQT/VST)
CEDASPE® VP-150 QT have been specially designed for use on transformers where no external pollution is admitted. It opens when the pressure inside…
It works automatically based on valve setting
Electrical switches: from 1 up to 2 (2 contacts each)
It features compression spring(s) outside
MESSKO® PSLC242
PSLC242 devices are ready-to-connect, unregulated power supply units. The power supply units are suitable for mains voltages of 230 V~ as well as 115…
DC supply 24 V / 1,5 A
Cap rail installation
MESSKO® MZT1650S
The portable MZT1650S calibration bath reliably checks the thermometers for transformers and industrial systems. The rear part of the rugged steel…
Reliable testing of thermometers in transformer and industrial systems
Mobile applicable
MESSKO® Power Supply SNT 36
SNT 36 devices are ready-to-connect switching power supplies. These wide-range power supplies are designed for line voltages of 85 V~ to 270 V~, for…
DC supply 24 V / 1.5 A
Cap rail installation
CEDASPE® VST2 080
Traction transformers are critical components within the traction chain, as they affect both train performance and operator services. The CEDASPE®…
No spring inside the transformer
Electrical contacts with separate junction box (IP65; one or two switches)
For various insulating liquids
CAPT® 095
CAPT® 095 is a flexible product with many variants. All the external parts are made of stainless steel to prevent oxidation; the stuffing box has to…
Solid design, adjustable upon request
Robust bakelite bars
External accessories in stainless steel
CAPT® 096
CAPT® 096 has a modular designed: the drive shaft is available in two different lengths – 91 mm or 131 mm; contacts are available in different…
Modular design
Two shaft lengths available
Innerwing in aluminum casting
ECOTAP® VPD® I
The smallest high-speed resistance type tap-changer in the world, made for single-phase applications. The ECOTAP® VPD® can be easily integrated in…
Um: 36 kV
Ir (1-/3-phase): 30 A or 100 A / -
Uir: 825 V
CAPT® 040
The tap changers from CAPT® 040 series are specifically designed to withstand a high rating of current and voltage up to 1.500 A. Multiple…
Resistant structure, solid design
Direct and remote control available
Microswitches for positioning monitoring available
ETOS® MD-IV
With our new ETOS® MD-IV we incorporate the proven ETOS® technology into the motor drive for our Load Tap-Changer RMV-II.
Integrated state of the art monitoring system ETOS®
Future-proof open digitization system
Proven Reinhausen motor drive technology
MESSKO® MSAFE®
More than 100 years of experience went into the design of the rugged MESSKO® MSAFE® Buchholz relay. It reliably protects fluid-filled transformers and…
Long service life thanks to high-quality materials
High operating safety due to helium leak test for oil and gas tightness
Protective magnetic switches to prevent false triggering
ECOTAP® VPD® III
ECOTAP® VPD® is the solution for all operators who have to maintain voltage in a defined and stable band in public, industrial and private…
Um: 36 kV / 40,5 kV
Ir (1-/3-phase): - / 30 A or 100 A
Uir: 825 V
CEDASPE® EB
Buchholz relays detect faults and minimize the propagation of any damage which might occur within liquid-filled transformers. The Buchholz relay…
BTS - quick delivery on selected variants
Waterproof - IP 65 protection degree
Large inspection window
VACUTAP® VI
The VACUTAP® VI was specifically developed for grid operation and limited space conditions. Thanks to its intelligent design, direct drive and a…
Um: 40 - 123 kV
Ir (1-/3-phase): - / 400 A
Uir: 1500 V
ECOTAP® SPD®
Single-phase on-load tap-changer and automatic voltage regulation all-in-one
As load and DER increase, voltage at the grid edge can limit…
Um: 24 kV / 26 kV
Ir (1-/3-phase): 15 A / -
Uir: 500 V
VACUTAP® VVS®
The most compact on-load tap-changer in vacuum design for use in small and medium network transformers. VACUTAP® VVS® impresses with a combination of…
Um: 40 - 76 kV
Ir (1-/3-phase): - / 400 A
Uir: 1300 V
CEDASPE® ET
Buchholz relays detect faults and minimize the propagation of any damage which might occur within liquid-filled transformers. Short circuit faults…
Waterproof - IP 65 protection degree
Large inspection window
Inlet diameter: 25 mm, 50 mm, 75 mm and 100 mm
VACUTAP® VV®
Compact on-load tap-changer in vacuum technology for transformers of the medium power range. VACUTAP® VV® is the professional for network…
Um: 40 - 145 kV
Ir (1-/3-phase): 400 A / 600 A
Uir: 2000 V
RR Series Buchholz relay (former ETI)
Buchholz relays detect faults and minimize the propagation of any damage which might occur within oil-filled transformers. Short circuit faults such…
Flow vane disengaged from the lower float: separate contacts (up to 6)
Independent switches for the upper and lower float and flow vane
Mechanical test button to test independently the three sets of switches, also remoted to man level
VACUTAP® VR®
Universal on-load tap-changer in vacuum technology for transformers with special power requirements. VACUTAP® VR® is the most powerful on-load…
Um: 72,5 - 420 kV
Ir (1-/3-phase): 2600 A* / 1600 A
Uir: 6000 V
GQ Series Buchholz relay (former ETI)
Buchholz relays detect faults and minimize the propagation of any damage which might occur within oil-filled transformers. Short circuit faults such…
Flow vane disengaged from the lower float: separate contacts (up to 4)
Independent switches for the upper and lower float and flow vane
Mechanical test button to test independently the three sets of switches, also remoted to man level
CEDASPE® DAROC (former ETI)
The DAROC oil check valve is designed to prevent the oil contained in the conservator from flowing out when a leak occurs and, for Series EDS-R, to…
The most accurate and reliable device in the market: It prevents loss of conservator oil in case of tank leakage
Its operation is completely automatic
Optional remote reset ensured by an addition by-pass pipe
VACUTAP® VRL®
The transformation of energy systems places enormous demands on system-critical network components such as power transformers. Our answer to this is…
Um: 72,5 - 420 kV
Ir (1-/3-phase): 3200 A / -
Uir: 6000 V
VACUTAP® VM®
Universal on-load tap-changer in vacuum design for transformers of the medium power range. VACUTAP® VM® is the product for all familiar applications…
Um: 72,5 - 300 kV
Ir (1-/3-phase): 1500 A / 650 A
Uir: 3300 V
VACUTAP® VT®
Air-insulated on-load tap-changer in vacuum technology for controllable, cast-resin-insulated distribution transformers in the medium and high power…
Um: 40,5 kV
Ir (1-/3-phase): 500 A / 500 A
Uir: 900 V
MESSKO® MSAFE® Gas Sampler
These gases can be used for a specific analysis to provide information on the status of the transformer or on-load tap-changer. When installed at a…
VACUTAP® AVT
Air-insulated on-load tap-changer in vacuum technology with integrated drive and automatic voltage regulator for small to medium controllable,…
Um: 12 kV
Ir (1-/3-phase): - / 170 A
Uir: 500 V
CEDASPE® RG3
The CEDASPE® RG3 body is made of aluminum alloy casting with a large inspection window with a graduated scale. CEDASPE® RG3.2 is equipped with a…
BTS - quick delivery on selected variants
Large inspection window
Suitable for gas analyzer devices
VACUTAP® RMV-II
Our first reactor-type on-load tap-changer with vacuum interrupters, developed in the 1980s specially for use in North America. VACUTAP® RMV impresses…
Um: 70 kV
Ir (1-/3-phase): 2500 A / 2500 A
Uir: 1000 V
CAPT® 099
CAPT® 099 is extremely flexible to install thanks to the cable application. Not only the tap changer can be installed horizontally on the top part of…
Cable type tap changer
Extremely flexible installation
Space saving in the transformer tank is allowed by the cable application
CEDASPE® R1/R2
CEDASPE® R series is spring-inside-the-tank pressure relief valve without contacts, for distribution oil-immersed transformers. It opens when the…
Shutter diameter: 1 and 2
Operating pressure: from 15 kPa up to 70 kPa
Wiring diagrams availability: no contacts
CEDASPE® CPR3
CEDASPE® CPR is a protective device specially designed to detect failures in the rubber bag with the risk of air getting inside the conservator. The…
BTS - quick delivery on selected variants
The first smart element in case of rubber bag failure. Conservator application
Waterproof - IP 65 protection degree
CEDASPE® OC
CEDASPE® OC is a protective device specially designed to detect potential gas generation inside the tank and is suitable for hermetically sealed…
Waterproof - IP 65 protection degree
Large inspection window
Inlet diameter: 38 mm
GRIDCON® PCS (Power Conversion System)
GRIDCON® PCS 3W and PCS XW offer flexible, scalable solutions for modern energy systems.The PCS 3W is a modular central inverter designed for high…
Modular design of hardware & software
Bring power quality functions such as harmonics filtering to your energy storage system
Benefit from a global service network
GRIDCON® DC Transformer
DC networks offer various advantages over the classic supply with AC voltage. Electronic loads such as servers or frequency converters work with DC…
Galvanically isolated and bidirectional DC/DC converter
Efficiency > 98,5% in typical operation
Modular system with 75 kW units
CEDASPE® e-DMCR
New cost-effective MODBUS-enabled protective relay for liquid-immersed distribution transformers.
Maschinenfabrik Reinhausen is very pleased to…
Four different safety and monitoring functions in one device
Only device fully following IEC 60076-22-1
Easy to connect via standard MODBUS interface
GRIDCON® DC Charger
GRIDCON® DCC (DC Charger) is a flexible, efficient and future-oriented solution for DC-fast charging stations being connected to a local DC grid. The…
Depot & destination charging of cars, busses & trucks
Direct, low-loss DC coupling with PV generation & energy storage
Overcome grid limitations and build more charge points according to your needs
CEDASPE® ETF-0 / ETF-1
Traction transformers are critical components within the traction chain, as they affect both train performance and operator services. CEDASPE® ETF-0 /…
Strong aluminum housing
Standard connecting flange with eight holes DIA12
For high operating oil temperatures as well as ultra-low ambient temperatures
ECOSENSE® ACTIVE PART
Remember: Problems with the active part cause 45% of transformer failures!
What if there is a new sensor family which makes continuous DGA monitoring…
Easy handling
Highest quality standard
Economical
MSENSE® DGA
Winding problems cause 45% of all transformer failures. The online oil analyzers of the MSENSE® DGA series ensure a measurably longer service life for…
Precise monitoring of the primary leading indicators hydrogen, carbon monoxide and humidity
Optional fault classification of thermal and electrical faults by detection of CxHy
Maintenance-free and without additional operating materials
CEDASPE® E700 (former ETI)
CEDASPE® E700 breathers consist of a silica gel charge container provided with a diffusion system that distributes the flow of air to be dried. The…
Single body design
Different closing systems (oil-seal hydraulic closing & metal filter made of sintered spheroidal
bronze)
Interchangeable with DIN series breathers
VACUTAP® VBO®
VACUTAP® VBO® is the first resistor-type, bolt-on on-load tap-changer (OLTC) in vacuum technology offering all advantages of this established…
Um: 40 kV
Ir (1-/3-phase): - / 400 A
Uir: 825 V
OILTAP® V
The most compact on-load tap-changer in oil design for use in small and medium network transformers.
Um: 40 - 123 kV
Ir (1-/3-phase): 200 A / 400 A
Uir: 1500 V
OILTAP® G
Universal on-load tap-changer in oil technology for high-power transformers. OILTAP® G is the most powerful on-load tap-changer in oil technology. It…
Um: 72,5 - 362 kV
Ir (1-/3-phase): 4500 A / 2000 A
Uir: 5000 V
CAPT® 085
CAPT® 085 is designed to withstand a maximum current of 100 A and voltage of 24 kV, it is available in two different dimensions – with a total length…
Rotary-type tap changer suitable for rated current up to 100 A, voltage up to 24 kV
Easy assembly in British Standard design
Adjustable shaft length
CAPT® 086
CAPT® 086 is available on multiple configurations on the rotary-type design. It can withstand a rated current from 150 A up to 300 A thanks to the…
Rotary-type tap changer for rated current up to 300 A, voltage up to 36 kV
Easy assembly in British Standard design
Adjustable shaft length
TAPCON® ISM®
Over 50 years of experience are built into the new TAPCON® ISM®. The result is a highly flexible voltage regulator that is optimally tailored to the…
Intuitive operation with a modern graphical touch display
Flexible architecture for even the most complex regulation tasks
Simplifies wiring with single-cable GOOSE communication
TAPCON® LV
Limit Volt is a separate monitoring device that monitors the controlled system of a high voltage transformer.
Monitoring the regulated line voltage (under- and overvoltage)
Monitoring and blocking of switching commands from the voltage regulator if the voltage is outside of the permitted range
Return to desired tap position of the tap changer
TAPCON® 230
The new generation TAPCON® 230 with a new design and significantly improved hardware and software functions. The concept of the new TAPCON® 230 is…
Minimal start-up time
Intuitive use, no training needed
Maximum flexibility and security in communication
TAPCON® 250
The standard voltage regulator for the North American market. Regardless of whether simple control tasks or complex requirements - the TAPCON® 250 can…
TAPCON® Dynamic Set Point Control (TDSC): Our answer for a dynamic voltage regulation in the grid.
Variety of adapter panels provided for existing transformer control units
Communication standards such as DNP and IEC61850
MSENSE® FO
When power transformers fail, the costs can get high. Online fiber optic temperature monitoring by MSENSE® FO precisely detects the winding…
Continuous, real-time recording of the winding temperature
Early detection of potential hotspots, enabling service-life management
Effective overload management with ETOS®
MSENSE® BM
According to CIGRÉ, defective bushings are responsible for 17% of all transformer failures and about 50% of all transformer fires. Online monitoring…
Secure early detection of errors, aging and failure risks
Patented double reference process eliminates environmental and operational impacts
Reduced operating costs, predictable maintenance and investment protection
MSENSE® VAM
On-load tap-changers are among the most important and critical components of power transformers. It is therefore crucial for grid operators, to be…
Indicates faults at an early stage that are not detected with other online monitoring methods
The self-learning algorithm guarantees easy integration into any transformer and can be used for a wide range of tap-changers from other manufacturers.
Integrated system solution through flexible combination options with other ETOS® modules
MESSKO® MLOG
Large quantities of goods are transported worldwide every day – the more valuable the goods, the more important it is that these goods arrive…
Continuous monitoring of transport operations leads to significantly reduced transport damage
No possibility of tampering, thanks to seamless documentation of accelerations, shock occurrences, temperature and humidity
Adjustable alarm limits and recording intervals for adjustment to individual needs
MESSKO® MPREC® test bench
The mobile MESSKO® MPREC® test bench checks and logs the accuracy and function of new and used pressure relief devices. It offers added convenience…
Use in the lab, in the test field, during commissioning or during maintenance
Simple and safe handling
Self-explanatory software and evaluation
MESSKO® Gas Quick Test
Fault gases can be detected easily, quickly and safely with the quick gas test. Based on the color change of the indicators integrated into the glass…
Quick fault gas detection
No use of separate chemicals
MESSKO® Test Pump
Checks the correct operation of the upper contact system (alarm) of the MESSKO® MSafe® Buchholz relay by air injection. Direct use on the Buchholz…
CEDASPE® LV (DIN)
The CEDASPE® LV series are 3kV solid porcelain open type bushings designed in accordance with the standard DIN 42539. Primarily used for indoor and…
Standardized design
Tried-and-tested product
Best value-price
CEDASPE® MV [up to 3150A]
CEDASPE® MV are solid porcelain liquid filled (hollow core oil communicating) bushings designed in accordance with EN 50180 and EN 50243. Used for…
Standardized design with a very high level of customization
Tried-and-tested product
Best value-price
CEDASPE® MON (Monoblock/Busbar)
The Cedaspe® MON monoblock offers four current ratings: 1700 A, 2500 A, 3150 A and 4000 A and fits on a standard "F" flange facing. As a standard,…
Updated version of the historical standards BS 2562
Voltage up to 1.1 kV
Current up to 4000 A
CEDASPE® CBB-OO
The Oil / Oil range of cable box bushings are designed in accordance with EN 50336 and also comply with IEC 60137. A range of bushings are available…
Specifically designed for use within indoor applications
Typically oil / shrouded arrangement
Voltage up to 36 kV
CEDASPE® CBB-OA
The Oil / Air range of cable box bushings are designed in accordance to EN 50336 and comply with IEC 60137. A range of bushings are available up to 36…
Bushings used within a disconnecting chamber (before the cable termination box) or within a cable box
Specifically designed for use within indoor applications
Typically oil / shrouded arrangement
CEDASPE® CBB-AA
The Air / Air range of cable box bushings are designed according to EN 50336 and comply with IEC 60137. A range of bushings are available up to 36…
Specifically designed for use within indoor applications
Voltage up to 36 kV
Current up to 630 A
CEDASPE® CBB-C
The condenser range of cable box bushings are interchangeable with the equivalent porcelain cable box bushing. The bushings are available for a range…
Interchangeable with the equivalent porcelain cable box bushing
Available for a range of insulating mediums such as oil / compound and air
Voltage up to 52 kV
Cable Box Fabrication
Standard cable boxes can be offered in a range of insulating mediums including oil / compound, air partially insulated and air fully insulated…
Optional separable connectors (with plug-in bushings)
Special application fittings within the cable box (disconnecting arrangements, surge arrestors, thermostatically controlled heating devices, isolating switches)
Voltage up to 36 kV
BS Bushing
The BS range of bushings are manufactured to meet specific requirements in the UK and are typically approved by the NGC or DNO's. The detail of the…
For specific requirements in the UK
Manufactured and tested in accordance with IEC 60137
Voltage from 1.1 kV to 52 kV
AS Bushing
To complement our standard range of bushings, the Australian range of bushings are manufactured to meet specific requirements in Australia and have…
For specific requirements in Australia
Manufactured and tested in accordance with IEC 60137
Voltage up to 52 kV
CEDASPE® TV
CEDASPE® TV breathers feature a hydraulic valve (oil sump). The upper and lower parts are made of a non-porous corrosion-proof aluminum alloy casting.…
Transfomer oil recommendation: 700 kg
Silica gel capacity: 0,25 kg
Connection type: Threaded
GRIDCON® Active Filter
Modular active harmonic filters for any application: The flexible design of our GRIDCON® ACF X-Wire filters enables operation in 3-wire and 4-wire…
Voltage control enables sensorless operation without current transformer, often with better results
Automatic compliance with permissible harmonic limits according to EN 50160 / IEC 61000 / IEEE 519 standard
Broadband filtering prevents additional heating of equipment by selectively reducing voltage distortion up to the 51st harmonic
GRIDCON® Harmonic Filter Portfolio
Our portfolio offers passive and active harmonic filters to achieve standard compliance for power networks of all voltage levels. Even…
Broadband attenuation in the higher frequency range up to approx. 10 kHz
Compliance with permissible harmonic limits according to EN 50160 / IEC 61000 / IEEE 519 standard
From products with fast delivery time to turn-key projects
GRIDCON® STATCOM
GRIDCON® STATCOM enables efficient implementation of voltage stabilization and load-flow optimizing measures.
Modular system approach enables power scaling up to 50 Mvar
Compact design for high installation versality
Adoptable to each medium voltage level
GRIDCON® POCO(X)
Compensation systems of the GRIDCON® POCOM®, POCOS®, POCOL® series offer maximum flexibility in the smallest space. Standardization and flexibility…
Modular and flexible design, modular cabinet design - functionality in the smallest of spaces
Fast and reliable, checks and function test already before delivery
Maximum operational safety, arc fault qualification for fault currents up to 50 kA
GRIDCON® Module & Station
Compensation systems of the GRIDCON® Module and GRIDCON® Station series as single- or multi-stage systems in metal-enclosed, containerized or concrete…
Plug & Operate, hardly any installation work at the site of operation due to complete disassembly at the factory extensive tests before delivery
Solutions for every climate zone, ventilation or air conditioning according to requirements, cold, heat, storm and dust are locked out
Maximum safety, safety for the operator thanks to complex safety concept, fault arc tested metal-encapsulated equipment
GRIDCON® OPC
Turnkey solution for climate-neutral supply of vessels in port facilities.
Modular and cascadable converter solution in the MW range
Services from 4 MVA module size
Ready-to-connect solutions according to standard (6.6 kV / 11 kV)
GRIDCON® BESS
Energy storage is making a vital contribution to the energy transformation. It allows for ancillary services in the grid and optimizes energy…
Modular design of hardware und software
Scalable from 90 kVA to 3.6 MVA, 64 kWh to 2.4 MWh
Power Quality functions integrated
GRIDCON® MSCDN
Maschinenfabrik Reinhausen offers customized system solutions for the provision and supply of reactive power in high and medium voltage grids to…
Combienert harmonic filter and capacitive power factor correction
Effective reactive power management and voltage regulation
Compact design, low losses, high availability
ReCoTec® HTV-Injection
Grasim Industries Limited and Maschinenfabrik Reinhausen GmbH (MR) are running a Joint Venture with a state-of-the-art CHCI (Composite Hollow Core…
From 72,5kV up to 400kV
Optimized design with special attention to the triple-point protection
Standardization for high volume
ROTAFIL®
With ROTAFIL® products Power Composites offers high-quality wounded insulating cylinders made of epoxy resins with a laminate glass fiber construction…
FRP tubes up to 12,5m
Available diameters up to 1200mm
Suitable for highest electrical and mechanical requirements
CEDASPE® TESS
The CEDASPE® TESS series of liquid filled thermometers is designed for measuring oil temperature in distribution transformers. This pointer type…
Nominal Diameter: 100 mm
Max pointer with external reset
Compensation of ambient temperature changes
Customer Specific Solutions
Maschinenfabrik Reinhausen offers customer-specific special solutions to avoid inrush current peaks and transient voltage fluctuations when switching…
Project-specific design for onshore or offshore applications for medium and high voltage
Dimensioning and supply of switch-on damping resistors for transient-free switching on of transformers and filter circuits
Premagnetization devices for switching transformers
MCONTROL®
With MCONTROL®, we provide high-quality touch panel displays for visualization. These displays are available in two sizes and for various conditions…
Fast Plug & Play installation in station buildings
Intuitive graphical menu structure for user-friendly operation
Connection of up to 10 MR servers (e.g. ETOS®)
TESSA® APM Oil
Simplify the oil analysis of your transformers with TESSA® APM Oil - a module of TESSA® APM.
Automated evaluation according to industry standards
Graphical and tabular trend view
Identification of fault causes and recommendations for action
Moisture sensor and BDV indicator (TFMR/TFTX)
With ETOS®, we have been successfully supporting the automation of transformers for years. New functions are constantly being developed and integrated…
Continuous monitoring of oil temperature and oil moisture
TFTX-Sensor: Enables continuous monitoring of the paper moisture
TFMR-Sensor: A second PT100 sensor for temperature interlock functions and arctic operation
DETC Control (Motor-drive unit)
Our electrical motor drive is designed to enhance transformer operation by providing precise control, advanced monitoring, and seamless user…
Simplified user interaction and control via local web interface
Remote control box with touch panel (optional)
Five programmable digital outputs
TESSA® APM 2.0
TESSA® APM 2.0 is the central, data-driven platform for condition monitoring and assessment of transformers and other electrical assets in the grid.…
Time savings through more efficient processes and automated workflows
Comprehensive condition assessment
Data- and experience-based recommendations for action
MSENSE® PDM
According to failure statistics (e.g., CIGRÉ), over 60 % of transformer failures are due to electrical or dielectric faults, many of which are linked…
Early fault detection
Preventive maintenance
Quality assurance
Show more
