AS Bushing
Australian Transformer Bushing
To complement our standard range of bushings, the Australian range of bushings are manufactured to meet specific requirements in Australia and have been developed in conjunction with local transformer manufacturers and are typically approved by the NGC or DNO's. We can offer replacement or refurbishment for existing units for this range. Air end termination is typically either the screwed conductor stem or flag terminal (various hole arrangements are available) and the oil end termination can be as the air end termination or a machined hole arrangement to suit the customers requirements.
Sus ventajas de un vistazo
-
For specific requirements in Australia
-
Manufactured and tested in accordance with IEC 60137
-
Voltage up to 52 kV
-
Current up to 3150 A
Información sobre el producto
| Rated voltage | From 12 kV up to 52 kV |
| Maximum rated current | From 250 A up to 3150 A |
| Nominal creepage distance | From 241mm to 1650mm |
| Antipollution level | From P1 up to P4 |
| Standard reference | IEC 60137 |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, Multiple connection styles |
| Rated voltage | From 12 kV up to 52 kV |
| Maximum rated current | From 250 A up to 3150 A |
| Nominal creepage distance | From 241mm to 1650mm |
| Antipollution level | From P1 up to P4 |
| Standard reference | IEC 60137 |
| Rod design | Rigid Stem |
| Rod material | Brass & Copper |
| Isolator material | Porcelain |
| Special surface treatment | Tinplating / Silverplating |
| Misc | Multiple copper rod customizations, Multiple connection styles |
