#Pardot #LinkedIn

MESSKO® Pt-MU

Signal conditioner

Using the Pt-MU measuring transducer, the signal of a Pt100 is converted into a standard signal proportional to the temperature. For example, the measuring transducer can be connected to the Pt100 connections in the ZT-F2.1 transformer temperature sensor or the combi well. It prepares the output signals of these devices for further processes in the computer or electrical/electronic display. The Pt-MU is used anywhere where measured values need to be transmitted over large distances or interference fields are located in the transmission path.

Your Advantages at a Glance

  1. Measuring transducer for Pt100

Show all

Product Information

Input variable Resistance PT100
Rated values Any temperature range between -200 - 850 °C (minimum span 40 K)
Outputs 0-20 mA/0-500 Ohm load and 0-10 V max. 10 mA load as well as 4-20 mA/0-500 Ohm load and 2-10 V max. 10 mA load
Accuracy +/- 0,5% of full scale
Response time < 300 ms (with frequency module < 400 ms)
Operation temperature -15 to +20 to +30 to +55 °C
Storage temperature -25 - 85 °C
Temperature influence <0,2 % at 10 K
Ambient conditions Stationary application, weather protected, rel. air humidity 5 - 95 %, no condensation, altitude up to 2000 m, water, rain, snow or hail excluded
Input variable Resistance PT100
Rated values Any temperature range between -200 - 850 °C (minimum span 40 K)
Outputs 0-20 mA/0-500 Ohm load and 0-10 V max. 10 mA load as well as 4-20 mA/0-500 Ohm load and 2-10 V max. 10 mA load
Accuracy +/- 0,5% of full scale
Response time < 300 ms (with frequency module < 400 ms)
Operation temperature -15 to +20 to +30 to +55 °C
Storage temperature -25 - 85 °C
Temperature influence <0,2 % at 10 K
Ambient conditions Stationary application, weather protected, rel. air humidity 5 - 95 %, no condensation, altitude up to 2000 m, water, rain, snow or hail excluded

Contact our Experts

Rodrigo Mecabo

Area Sales Manager Alabama, Arkansas, Louisiana, Mississippi

Phone +1 731 4206934
E-Mail R.Mecabo@reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Edward Hed

Area Sales Manager Alaska, Hawaii, Idaho, Montana, Nebraska, Nevada, Oregon, Utah, Washington, Wyoming

Phone +1 731 6182188
E-Mail e.hed@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Jose Febres

Area Sales Manager Arizona, California

Phone +1 731 4879484
E-Mail J.febres@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Paul Shuttleworth

Area Sales Manager Colorado, New Mexico, Oklahoma, Texas

Phone +1 731 6168729
E-Mail p.shuttleworth@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Mark Andrews

Area Sales Manager Connecticut, Delaware, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont, Virginia

Phone +1 731 487 4034
E-Mail M.Andrews@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Jarrad Weiss

Area Sales Manager Florida, Georgia, South Carolina

Phone +1 731 6189267
E-Mail j.weiss@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Patrick Wright

Area Sales Manager Illinois, Iowa, Kansas, Michigan, Minnesota, North Dakota, South Dakota, Wisconsin

Phone +1 513 9402386
E-Mail p.wright@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Tony Boyd

Area Sales Manager Indiana, Kentucky, Missouri, Tennessee

Phone +1 731 3945596
E-Mail t.boyd@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

Karl Repko

Area Sales Manager North Carolina, Ohio, West Virginia

Phone +1 731 2170 103
E-Mail k.repko@us.reinhausen.com
QR

Scan the QR code to save the contact details as a VCF on your smartphone

To the Contact Finder

contact
Contact